Background Image

Addressable Fire Alarm Systems 


What is an Addressable Alarm System?

An Addressable Fire alarm system is preferred over a conventional system because it allows for quick location of a fire. This is crucial in large installations and allows for faster response to fire. Furthermore, faults are resolved faster as the Fire Alarm Panel can report the exact location of the fault, thus limiting the time spent rectifying the fault and down-time as well. Addressable Alarm devices are also connected in a "loop", therefore allowing a detector to stay connected to the panel in the event that one side of the loop is disconnected. Over the years, we have advised client to migrate to the addressable alarm system as they offer greater control and flexibility in general. 

Background Image

Zeta Premier Quatro Fire Alarm Panel

The Premier Quattro Panel uses the MKII protocol and is available in configurations of 2,4,6,8 Loops. It is an addressable panel and is loaded with a lot of features including networking and remote monitoring.  

Background Image

Zeta Smart Connect Fire Alarm Panel

The Smart Connect Panel is a single loop Addressable Panel which uses the MKII protocol. The panel comes with a network interface built-in and uses a cloud-based monitoring platform, thus allowing it to be access remotely. 


MKII Addressable Detectors & Accessories

Blog Thumb

MKII-AOP Optical Smoke Detector

The Fyreye MKII optical smoke detector (MKII-AOP) uses a pulsing IR LED & photodiode to detect IR scatter caused by smoke entering the chamber. The detector is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10μm).

Blog Thumb

MKII-AHR Heat Detector

The Fyreye MKII Rate of Rise heat detector (MKII-AHR) uses a thermistor arrangement to sense a quick rise in temperature and also a final threshold temperature of 57°C. The Fyreye fixed heat detector (MKII-AHF) has a single thermistor arrangement that gives an alarm at a temperature of 57°C, where the MKII-AHF/ CS90 gives an alarm above 86°C.

Blog Thumb

CP3 Manual Call Point

The ZT-CP3/AD and ZT-CP3/WP/AD addressable call points are unique in that they mimic the feel of breaking glass whilst offering the user the benefits and environmental advantages of a re-settable operating element.

Blog Thumb

ZRAPB Sounder Beacon

The Raptor addressable sounder with beacon has a coverage pattern of W 2.9 - 8.5 and the sounder part has 16 tones selectable at the control panel. It has a flash rates between 0.33Hz and 1.5Hz. It has been designed to make an “electronics free” first fix and is available in red or white.

Blog Thumb

ZAI-MI Input module with isolator

The ZAI-MI is an input module supplied in a modern enclosure (2 gang box size) with well protected electronic circuit board to minimize any damages during installation.The ZAI-MI is used to monitor and raise alarm from any ancilliary equipment such as sprinkler flow switch, aspiration detectors, secondary fire control panel, beam detectors, external power supplies etc.

Blog Thumb

GSM Communicator

Zeta GSM communicator is an interface that allows a fire alarm panel to send a SMS text message in the event of an alarm or a fault. The communicator accepts a standard Mobile Phone SIM card, and is then programmed with the alarm information & phone numbers via a PC. The unit can run on any power supply between 9 & 24V DC.

Reach out to us anytime and we'll happily answer your questions


To request for more information about the products and services on this page, do not hesitate to contact us by web chat, email, phone call or by leaving a message on the right. 

Our Customer Support team looks forward to hearing from you. 


+ 248 4 411 444

No. 3B SENPA Building
Ave. d'Haroa, Providence
Mahe, Seychelles

Leave A Message